Відео

What the hell is that dvr its so clean

Why this thing doesn't have a switch in the IEC socket? Don't tell me you have to pull the cable to turn it off (or does it have a sleep mode??) Also, that HOTA logo. For a minute thought that company was part of POLAR (sports watches)...

If I paid more than tree-fiddy for video that lousy, back they would go.

Broke 1 of the 4 arms on the VTX mount of my flylens 85 by (I think) powerlooping into concrete lol. The plastic cracked around the M2 threaded insert. It still worked after, but I ended up swapping it out eventually. Both pieces held up fine without the foam pad apart from that rather drastic crash.

I just bought the 2024 version of the Nexa 3 Evo with the t-motor 1604-3800kv, and wow! It's a ton of fun! There is tons of power, and it's my first "real drone" outside of 2 inches or smaller, so it's been fun adjusting to it. Also build quality is amazing and they respond fast to any questions that you may have. Also I used your avionrc discount code that you put in your nexa 3.5 video as the one in this video doesn't work, so thank you for that, sir. Oh, and I would love to maybe see a video on the 2024 Nexa 3 Evo so I can hear your own thoughts about it.

I think that thing over the camera is supposed to be camera protection if it is in the right place, but as you say, you would have to tighten down the screws, however I have seen another reviewer do this with no problem...I agree though, would need to be careful doing it. I just ordered one.

Hi Nick, I know this is an older review so I'm not sure if you still have this whoop anymore. Do you mind doing a quick test and see at what camera tilt will the ducts be out of frame? Thanks!

Helooo gents.. JO you fly well.... something i always wondered ...first .. how do you know how quad is orientated especially if it further away from you and even doing yaw tricks...... secondly... will headless mode work in acro ?

Must feel conflicting to post a review when not liking the product.

Question is open to anyone. I had LASIK surgery but my sight was "maximized" for my computer monitor distance. So it did a great job there. I just got a Cetus Lite FPV kit VR02 goggles and can't see with them on my face. I have a gooseneck phone holder rigged up to hold it out in front of my face say six or so inches and it's clear. On my face is blurry. I also have a Quest 2 and have no issues whether it's near or far sighted. I know that's an apple vs orange; I don't know if it's those goggles or if ABC $500 goggles would have the same issue. My sister just had hers done but one eye is for distance the other near/reading.

Wow so heavy lol.. my 4inch 6s 2fiddy only 182g

Would it fly better props out?

You got such a nice knife edge tree, never seen you knife edge it which should be a crime 😂 SEND IT

Don't like those kinds of battery holder. I usually clip the bottom and put a strap on them. I've been flying for over 30 years, and honestly think I've had more fun with whoops over the years than any other area of the hobby. With the advent of digital video, it's even more fun. There may be better quads of this type out there than this, but unless you are a hardcore acro flyer, I think this is the best buy of them all.

The 1404 motor version seems to wiggle less in that way 🤔

Is the o3 only compatible with DJI goggles?

6:42 you cut the corner and that is why the pico wins :') haha!

Your house is so neat, clean, and lovely!

Dld the same with DJI2 goggles

cybertruck looking drone

Had my M8D for a few days now. One of the fans feels like it's rubbing on something when it powers up. Thanks for the mention of the SD card. I deleted a few of sounds as I like the high alert volume but don't want notifications for battery connected, disconnected or fast charge complete. 10 profiles is a bit limiting and I wish they'd have a Quantity slider to support easier parallel charging. Overall it's nice for $110.

Hey this is my first drone. I only have experience playing on a sim. I’m lost on where the bind buttons are to connect the goggles and the tbs crossfire controller

Hi Nick, not sure whether you still see these comments but I'd be interested in seeing a comparison between HDzero and Walksnail for this particular build (I have my own heavy - which is 41g). Finally if you could throw in your opinion regarding trade-off with regards to analog, from the 'winner' of the Walksnail/HDzero pair. I'm interested in this particular environment - tight space backyard. Maybe going around the front of your house for added input. Thank you sir.

was this edited with gyroflow?

Amazing.

Just ordered 1. This should add life to 1S now that they can be storage charged.

My camera died after 5 minutes of gentle crash free flight. I'm sorry but that's just not normal. I'm so disappointed, I'm starting the return process. I can't justify putting parts into something that died in 5 minutes without crashing.

My mobula 6 video feed died after 2 hours. Most of that time was spent setting up flight modes and charging the batteries. It was flown for about 5 minutes before the camera died. 3 total flights, no crashes and now the video feed is dead.

In Betaflight Motors tab do you have the MOTOR_STOP setting enabled? My mob6 had it disabled by default. Discovered this when I disabled permanent air mode, I armed for the first time and the motors didn't start. So it could be related to whatever controls air mode

Hey Nick, Do you have a homepage or sth where you share your pid tunes? My Mob8 flies very poorly. I get propwash so fast. It can't even handle a small split S or sharper corners without starting to wobble. I have other happymodel quads and all of those were great straight out of the box. I just can't believe that it flies like this. Kinda feels sluggish aswell and my rates feel definitely slower on it. Hovering and cruising is very smooth so i don't think that i got a damaged unit. I can't find a single guide or video on how to improve the tuning, it seems like nobody did it. I tried it myself and followed instruction for a general whoop tune, but i just caused fly aways and now I'm a afraid to try it again

How to record whoop sounds in dvr?

Hey Nick, in one comment I mentioned that almost a deal breaker for me was the fact that you can only see 6 cells at once on the screen. Unlike Q4QC where at any point you can see voltage of all (16 in case of 4s) cells. It turns out that is not true :) And I didn't see anyone on UA-cam mentioning that. By long pressing CH button you change the display to showing all 24 cells at once :) You can try it.

Thank u so much and amazing skills ! If i will play 90% indoor what's the best choice : meteor 75 pro hd walksnail or mobula 8 walksnail ? It will be my first drone. Thanks !

Hi, nice fly. Do you lower rates or expo for such a smooth fly or its pure skill/sticktime. Find out today big problem. Hope you can help me solve it. Went to fly my Meteor65pro, but it didn't work. When plugged in battery the motors do the beep sound, but nothing else. ELRS receiver is not working, neither VTX. Betaflight or PC doesn't see the drone when pugged(can se other drones, cable/betaflight/drivers are fine). Not sure if it does anything to do with it, on my last fright it says heat alert 74*C, but I landed immediately. What could it be and what can I do to help it. Thanks.

Doesn't it come with 1404? Seems like it's underpowered:(

Hey Nick. I know this video has been out for a bit, but I'm guessing you still check comments. I have 2 mob6 2024s- one has the bmi gyro and one has the icm gyro. All the settings are identical except for board orientation and gyro pid loop frequency that they each require. I am using the betafpv folded batteries 300mah and have been flying the same racegow course over and over the past few days. I'm not a fast racer but am improving consistency. The mob6 with the icm gyro consistently gives me right at 5 minutes flight time and the one with the bmi consistently gives 4 minutes. Have you ever run into something like this before? 1 minute difference seems pretty significant with all else being equal. I was just interested in your thoughts.

great review!

So how do toy drones like this (sort of) maintain altitude, meanwhile "real" drones like the Mobula7 with Betaflight do not have that capability? Are the toys using gyro and accelerometer data to keep track of where they are and have moved? Similar question for the pseudo-return to home feature? Why can't Betaflight do this too?

I just picked up one of these in analog 6s variant. I got it for "safety" reasons. I often film chasing rc cars and moving soft targets. Ive gotten lightening fast on the disarm switch but having the guards make people feel better about a 600g quad ripping 60mph at their face

Is this still a good quad for 2024 ??

Beautiful house and yard, man ! 👍

Hi @NickBurnsFPV and thanks for your great content. At 2:36 you mention the problem of the length of the battery lead. Mine actually snapped off teh A30 connectors as I have been pushing the battery in a more or less centered position. I'd like to try and solder the cable at a right angle as you did there with the analog version of the Mob6. Do you have any video on how to do that? Sorry for the noob question!

watch out with buying from this company! I bought from them and took 2 months to get to me. broke in 3 days, and never got a replacement

Whats the name off the wall adaptor?

Looks kinda like pierce brosnan

Once they make one with analog fpv footage but digital recording i gotta buy one, how do they even do that tho? Digital vtx and analog camera or something?

how do you get to the 03 Bind button? Do I have to remove that bottom plate?

Horrible design in terms of inviting damage if landing in a puddle. Industry making mistake going with this inverted prop lawnmower design IMO.

Hey Nick! I am close to buying this Ikon 2.5, but I have a couple questions. It looks like the newer props Avionrc are equipping this model with are the Avan Rush 3-bladed 2.5 props, with 1.9 pitch, made by Emax. But the Avan Rush was originally made for smaller motors like the Emax 1106 4500kv for 4S power or the Emax 1106 6000kv on 3S power, according to Emax's website, the makers of the propellers. So, in short, it looks like the 1404 4600kv motors on the Ikon 2.5 can and should power higher pitch 3-bladed props (maybe 2.5 pitch), or at least 4-bladed props with 2 pitch. Have you tried running the Ikon 2.5 with any other props for more power? I'm also considering trying it on 3S, but with a much higher 3 or 3.5 pitch 3-bladed 2.5 inch props. Cheers!

"No fuss" well yeah exept for shipping and customer support.. It's a nightmare buying from Emax's website...